Designed for Motorsport
Drivercom is designed from the ground up with the performance racing environment in mind. Improved and refined over several years, our Drivercom earpieces offer a superbly clear and comfortable communication experience that's second to none.
Using the softest silicone the Drivercom is crafted to sit as flush in the ear as possible, this reduces the possibility of pressure being applied when wearing a crash helmet and ensures the earpiece is able to flex to accommodate changes in the ear shape that occur when a helmet is worn. In addition, using a softer silicone ensures that isolation is maintained at all times when in use so you always get clear communication that's not clouded with outside noise.
No. of Drivers 1.
Build Material 40 Shore, custom fit, medical grade silicone moulds finished with a hard wearing flexible lacquer.
Mould Type Full- Concha.
Cable Exit Options Bottom Exit (straight down).
Cable Type ACS Black Kevlar Cable.
Standard Cable Length From back of connector to Y Joint is 19cm From back of connector to the back of Moulds is 51cm.
Standard Connector Phono (RCA) Connector (3.5mm Stereo, mono and Lemo 00.250 available).
Frequency Range 40hz-15Khz.
Sensitivity @ 1Khz 104.5db.
Impedance @ 1Khz 375 ohms
Crystal clear communication
The Drivercom uses a single lightweight speaker that's been selected to deliver crystal clear communications and work perfectly with the majority of radio systems. Using balanced armature technology, the Drivercom speaker is compact enough to fit discreetly in the ear allowing us to keep the size and weight of your earpieces to a minimum whilst being powerful enough to ensure that you get a clear vocal signal.
Core strengths
Making sure that we use the right cable to deliver your sound is as important as every other aspect in the design of our earpieces so we make sure they are just as well thought out. Starting with the best conductive core we then add kevlar threads for strength and flexibility so that we can be sure you'll get the performance you demand. Each cable is sheathed with a special finish that reduces the transmission of friction noise to the earpieces so there's as little interference as possible. The cable is then clamped at the Y divide with a custom pressed lengthened binder to give it extra strength where you need it most. The Drivercom can be made with a standard length (51cm) or a specified length up to 1.4 meter cable depending on which is most suitable for your application.
